8 Gauge Amp Kit w/ RCA



KnuKonceptz Kolossus Complete 8 Gauge Amplifier Installation Kit


  • Power Wire: 18 Feet Tinned OFC 8 Gauge Ultra Flex Blue
  • Ground Wire: 3 Feet Tinned OFC 8 Gauge Ultra Flex Black
  • Fuse Holder: In Line with 60A Mini-ANL Fuse
  • RCA Cable: 17 Feet Klarity coaxial 2 Channel RCA
  • Remote Wire: 17 Feet Blue Turn on lead
  • Speaker Wire: 20 Feet Kord OFC Blue 14 Gauge Speaker Wire
  • Terminals: 4 Gauge Gold Plated Ring Terminals(2), 4 Gauge Gold Plated Spade Terminals(2)
  • Wire ties and bushings

Note: this kit contains one (1) 2 channel RCA interconnect cable. If you need additional RCA cables, check out the recommended KnuKonceptz Klarity RCA Cable 2 Channel RCA Interconnect Cable here.

Power Rating:

KnuKonceptz does not use “watts” to rate our amp kits. This is a very inaccurate method to determine what the proper gauge wire required for your amp installation. There are many amp manufactures and not all of them represent the output of their product accurately. Please refer to your amplifier’s fuse rating, this is a number a manufacture can not fake, well they could but it would put their product in harms way! Add up the fuses on the end of your amp (two 25A fuses = 50A total draw) If this number is under 60A, this kit will fit your application. If over 60A, this amp install kit will not work for that application, that installation would require 4 gauge or larger wire.

Wire Size Calculator: https://caraudioadvice.com/calculators/

Additional Information:

KnuKonceptz Kolossus amp installation kits feature our top of the line Kolossus Fleks power and ground cables. Made up of ultra flexible pvc and ultra fine tinned strands of oxygen free copper (OFC), the Kolossus Kable is the standard for which all others are compared to. The KOL-AK8 amp kit provides 18 feet of blue marine grade, full copper battery power wire and 3 feet of translucent black (smoke) ground wire. The KnuKonceptz FH-44 fuse holder with a 60A Mini ANL fuse is provided within the KOL-AK8 amp install kit. The fuse holder does not come installed within the cable, this allows the installer to place the inline fuse holder in an optimum location during installation. It also allows the installer to extend the power wire 1-3′ by using the inline fuse holder to add cable to the main run (leaving the 18′ as one unit and using the FH-44 to “splice” a few feet of wire)

Signal for your 2 channel amplifier installation kit is carried by the Klarity Kable 5 Meter (16.25′) RCA Cable. The Klarity RCA Cable is a copper braid shielded coaxial RCA that uses a Hybrid metal/molded RCA termination with strain relief for a durable, low loss connection to your head unit and amplifier. A separate remote turn on lead is included. This wire is connected to your radio’s power antenna lead or amp turn on lead (refer to your head unit’s manual) Your amplifier’s output is sent through KnuKonceptz Kord 14 gauge speaker wire, 20 feet of 14 gauge blue speaker wire is included with the kit.


There are no reviews yet.

Be the first to review “8 Gauge Amp Kit w/ RCA”

This site uses Akismet to reduce spam. Learn how your comment data is processed.