4 Gauge Amp Kit w/ RCA

Description

KnuKonceptz Kolossus Complete 4 Gauge Amplifier Installation Kit

Contents:

• 16.5 Feet 4 Gauge Ultra Flex Blue Tinned Oxygen Free Copper Power Wire
• 3 Feet 4 Gauge Ultra Flex Black Tinned Oxygen Free Copper Ground Wire
• One inline fuse holder with 120A Mini ANL Fuse
• One 17 Foot OFC Klarity 2 Channel RCA Cable
• One 17 Foot OFC Remote Turn On Lead
• 20 Feet BLUE Kord Kable OFC 12 Gauge Speaker Wire
• 2 gold plated 4 gauge ring terminals, 2 gold plated 4 gauge spade terminals
• grommets and wire ties

Note: this kit contains one (1) 2 channel RCA interconnect cable. If you need additional RCA cables, check out the recommended KnuKonceptz Klarity RCA Cable 2 Channel RCA Interconnect Cable here.

Power Rating:

KnuKonceptz does not use “watts” to rate amp kits. This is a very inaccurate method to determine what the proper gauge wire required for your amp installation. There are many amp manufactures and not all of them represent the output of their product accurately. Please refer to your amplifier’s fuse rating, this is a number a manufacture cannot fake, well they could but it would put their product in harms way! Add up the fuses on the end of your amp (three 25A fuses = 75A total draw) If this number is under 120A, this kit will fit your application. If over 120A, but less then 150A, this kit will work, but a 150A mini-ANL fuse is required (sold separately). If over 150A, this amp install kit will not work for that application, that installation would require 2 gauge or larger wire.

Wire Size Calculator: https://caraudioadvice.com/calculators/

Additional Information:

KnuKonceptz Kolossus amp installation kits feature the top of the line Kolossus Fleks power and ground cables. Made up of ultra flexible pvc and ultra fine tinned strands of oxygen free copper (OFC), the Kolossus Kable is the standard for which all others are compared to. The KOL-AK4 amp kit provides 18 feet of blue marine grade, full copper battery power wire and 3 feet of translucent black (smoke) ground wire. The KnuKonceptz FH-44 fuse holder with a 120A Mini ANL fuse is provided within the KOL-AK4 amp install kit, but can be upgraded to a maximum of 150A Mini ANL fuse (sold separately MANL-150). The fuse holder does not come installed within the cable, this allows the installer to place the inline fuse holder in an optimum location during installation. It also allows the installer to extend the power wire 1-3′ by using the inline fuse holder to add cable to the main run (leaving the 18′ as one unit and using the FH-44 to “splice” a few feet of wire).

Signal for your 2 channel amplifier installation kit is carried by the Klarity Kable 5 Meter (16.25′) RCA Cable. The Klarity RCA Cable is a copper braid shielded coaxial RCA that uses a Hybrid metal/molded RCA termination with strain relief for a durable, low loss connection to your head unit and amplifier. A separate remote turn on lead is included. This wire is connected to your radio’s power antenna lead or amp turn on lead (refer to your head unit’s manual). Your amplifier’s output is sent through KnuKonceptz Kord 12 gauge speaker wire, 20 feet of 12 gauge blue speaker wire is included with the kit.